1600
ERROR: Cannot allocate call buffer: val
Description
An attempt to allocate memory dynamically from the operating system using malloc failed.
Action
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Either reduce the memory usage on the machine or increase the amount of physical memory on the machine. Also, increase the space on the swap device.
See Also
See the malloc function.
For UNIX systems, see the malloc(3) manual page.
For Microsoft Windows NT systems, see the Microsoft Visual C++ online help.
1601
ERROR: Cannot allocate call buffer: val
Description
An attempt to allocate memory dynamically from the operating system using malloc failed.
Action
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Either reduce the memory usage on the machine or increase the amount of physical memory on the machine. Also, increase the space on the swap device.
See Also
See the malloc function.
For UNIX systems, see the malloc(3) manual page.
For Microsoft Windows NT systems, see the Microsoft Visual C++ online help.
1602
ERROR: Cannot reallocate call buffer: val
Description
An attempt to allocate memory dynamically from the operating system using malloc failed.
Action
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Either reduce the memory usage on the machine or increase the amount of physical memory on the machine. Also, increase the space on the swap device.
See Also
See the malloc function.
For UNIX systems, see the malloc(3) manual page.
For Microsoft Windows NT systems, see the Microsoft Visual C++ online help.
1603
ERROR: Cannot reallocate call buffer: val
Description
An attempt to allocate memory dynamically from the operating system using malloc failed.
Action
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Either reduce the memory usage on the machine or increase the amount of physical memory on the machine. Also, increase the space on the swap device.
See Also
See the malloc function.
For UNIX systems, see the malloc(3) manual page.
For Microsoft Windows NT systems, see the Microsoft Visual C++ online help.
1604
ERROR: Cannot decode reply header
Description
The IIOP Server Listener/Handler failed to decode the header of a TGIOP reply message received from a WLE server.
Action
Contact BEA Customer Support.
1605
ERROR: Type switch uninitialization failure
Description
While processing a client application buffer, the buffer uninitialization function, _tmuninitbuf(), returned an error.
Action
Check the buffer type switch to see that it is correctly set up (that is, that the right uninitialization function is associated with the correct buffer type). If the buffer type is application defined, check the uninitialization function to see that it is coded correctly.
See Also
The buffer (3c) and typesw (5) commands. For information about these commands, see the BEA TUXEDO Reference Manual.
1606
INFO: Ignoring non-request type messages
Description
The IIOP Server Listener/Handler received a message that was not a request. The message is being ignored.
Action
none
1607
ERROR: Invalid internal buffer: val
Description
An internal buffer is corrupted. Additional information about the problem is printed as part of the message.
Action
Contact BEA Customer Support.
1608
ERROR: cannot allocate reply buffer: val
Description
An attempt to allocate memory dynamically from the operating system using malloc failed.
Action
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Either reduce the memory usage on the machine or increase the amount of physical memory on the machine. Also, increase the space on the swap device.
See Also
See the malloc function.
For UNIX systems, see the malloc(3) manual page.
For Microsoft Windows NT systems, see the Microsoft Visual C++ online help.
1609
ERROR: Cannot decode request header
Description
The IIOP Server Listener/Handler received a GIOP request message that could not be decoded. This probably indicates that the client application is not GIOP 1.0 compliant. The IIOP Server Listener/Handler returns a GIOP error message to the client application.
Action
Make sure the client application is GIOP 1.0 compliant.
1610
ERROR: Cannot decode request header
Description
The IIOP Server Listener/Handler received a GIOP request message that could not be decoded. This probably indicates that the client application is not GIOP 1.0 compliant. The IIOP Server Listener/Handler returns a GIOP error message to the client application.
Action
Make sure the client application is GIOP 1.0 compliant.
1611
ERROR: Memory allocation failure
Description
An attempt to allocate memory dynamically from the operating system using malloc failed.
Action
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Either reduce the memory usage on the machine or increase the amount of physical memory on the machine. Also, increase the space on the swap device.
See Also
See the malloc function.
For UNIX systems, see the malloc(3) manual page.
For Microsoft Windows NT systems, see the Microsoft Visual C++ online help.
1612
ERROR: Memory allocation failure
Description
An attempt to allocate memory dynamically from the operating system using malloc failed.
Action
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Either reduce the memory usage on the machine or increase the amount of physical memory on the machine. Also, increase the space on the swap device.
See Also
See the malloc function.
For UNIX systems, see the malloc(3) manual page.
For Microsoft Windows NT systems, see the Microsoft Visual C++ online help.
1613
ERROR: Memory allocation failure
Description
An attempt to allocate memory dynamically from the operating system using malloc failed.
Action
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Either reduce the memory usage on the machine or increase the amount of physical memory on the machine. Also, increase the space on the swap device.
See Also
See the malloc function.
For UNIX systems, see the malloc(3) manual page.
For Microsoft Windows NT systems, see the Microsoft Visual C++ online help.
1614
ERROR: Memory allocation failure
Description
An attempt to allocate memory dynamically from the operating system using malloc failed.
Action
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Either reduce the memory usage on the machine or increase the amount of physical memory on the machine. Also, increase the space on the swap device.
See Also
See the malloc function.
For UNIX systems, see the malloc(3) manual page.
For Microsoft Windows NT systems, see the Microsoft Visual C++ online help.
1615
ERROR: Memory allocation failure
Description
An attempt to allocate memory dynamically from the operating system using malloc failed.
Action
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Either reduce the memory usage on the machine or increase the amount of physical memory on the machine. Also, increase the space on the swap device.
See Also
See the malloc function.
For UNIX systems, see the malloc(3) manual page.
For Microsoft Windows NT systems, see the Microsoft Visual C++ online help.
1616
ERROR: Memory allocation failure
Description
An attempt to allocate memory dynamically from the operating system using malloc failed.
Action
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Either reduce the memory usage on the machine or increase the amount of physical memory on the machine. Also, increase the space on the swap device.
See Also
See the malloc function.
For UNIX systems, see the malloc(3) manual page.
For Microsoft Windows NT systems, see the Microsoft Visual C++ online help.
1617
ERROR: Cannot decode locate request
Description
The IIOP Server Listener/Handler received a GIOP locate request message that could not be decoded. This probably indicates that the client application is not GIOP 1.0 compliant. The IIOP Server Listener/Handler returns a GIOP error message to the client application.
Action
Make sure the client application is GIOP 1.0 compliant.
1618
ERROR: Could not perform SSL connect to host/port val
Description
The IIOP Server Listener/Handler was unable make a SSL connection to the host/port 'val'.
Action
Check the ULOG for messages indicating the nature of the failure.
1619
ERROR: Missing outbound connection
Description
The IIOP Server Handler does not have the necessary outbound connection information to send the request.
Action
The error indicates an internal problem with the IIOP Server Handler. Contact BEA Technical Support.
1620
ERROR: Missing outbound connection
Description
The IIOP Server Handler does not have the necessary outbound connection information to send the request.
Action
The error indicates an internal problem with the IIOP Server Handler. Contact BEA Technical Support.
1621
ERROR: Cannot send reply to caller: val
Description
The IIOP Server Handler could not send the reply from the remote server application back to the caller (native client or server).
Action
Examine the ULOG for any immediately preceding messages for further information about the cause of the error. Contact BEA Technical Support.
1622
ERROR: Cannot send reply to caller: val
Description
The IIOP Server Handler could not send the reply from the remote server application back to the caller (native client or server).
Action
Examine the ULOG for any immediately preceding messages for further information about the cause of the error. Contact BEA Technical Support.
1623
ERROR: Cannot send reply to caller: val
Description
The IIOP Server Handler could not send the reply from the remote server application back to the caller (native client or server).
Action
Examine the ULOG for any immediately preceding messages for further information about the cause of the error. Contact BEA Technical Support.
1625
ERROR: Cannot encode IIOP profile
Description
The IIOP Server Listener/Handler failed to allocate memory for an internal IIOP buffer.
Action
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
1626
ERROR: Could not perform SSL accept from host/port val
Description
The IIOP Server Listener/Handler was unable accept a SSL connection from the host/port 'val'.
Action
Check the ULOG for messages indicating the nature of the failure.
1627
ERROR: Error switching to the handler's context
Description
The IIOP Server Handler was attempting to switch from a client application context to the IIOP Server Handler context when it experienced an error.
Action
The error indicates an internal problem with the IIOP Server Handler. Contact BEA Customer Support.
1628
ERROR: Could not read from SSL connection, err = val
Description
The IIOP Server Listener/Handler received the error 'val' while reading from the SSL connection.
Action
Check the ULOG for messages indicating the nature of the failure. Contact BEA Customer Support.
1629
ERROR: Could not write to SSL connection, err = val
Description
The IIOP Server Listener/Handler received the error 'val' while writing to the SSL connection.
Action
Check the ULOG for messages indicating the nature of the failure. Contact BEA Customer Support.
1630
ERROR: Could not set SSL callback, err = val
Description
The IIOP Server Listener/Handler received the error 'val' while initializing SSL. SSL reported this error while trying to set the SSLPlus read callback functions.
Action
Contact BEA Customer Support.
1631
ERROR: Could not set SSL callback, err = val
Description
The IIOP Server Listener/Handler received the error 'val' while initializing SSL. SSL reported this error while trying to set the SSLPlus write callback function.
Action
Contact BEA Customer Support.
1632
ERROR: Could not set SSL callback, err = val
Description
The IIOP Server Listener/Handler received the error 'val' while initializing SSL. SSL reported this error while trying to set the random data object callback function.
Action
Contact BEA Customer Support.
1633
ERROR: Could not set SSL callback info, err = val
Description
The IIOP Server Listener/Handler received the error 'val' while initializing SSL. SSL reported this error while trying to set the cipher negotiation callback function.
Action
Contact BEA Customer Support.
1634
ERROR: Could not set SSL callback info, err = val
Description
The IIOP Server Listener/Handler received the error 'val' while initializing SSL. SSL reported this error while trying to set the random data object callback information.
Action
Contact BEA Customer Support.
1635
ERROR: Memory allocation failure
Description
An attempt to allocate memory dynamically from the operating system using malloc failed.
Action
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Either reduce the memory usage on the machine or increase the amount of physical memory on the machine. Also, increase the space on the swap device.
See Also
See the malloc function.
For UNIX systems, see the malloc(3) manual page.
For Microsoft Windows NT systems, see the Microsoft Visual C++ online help.
1636
ERROR: Memory allocation failure
Description
An attempt to allocate memory dynamically from the operating system using malloc failed.
Action
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Either reduce the memory usage on the machine or increase the amount of physical memory on the machine. Also, increase the space on the swap device.
See Also
See the malloc function.
For UNIX systems, see the malloc(3) manual page.
For Microsoft Windows NT systems, see the Microsoft Visual C++ online help.
1637
ERROR: Memory allocation failure
Description
An attempt to allocate memory dynamically from the operating system using malloc failed.
Action
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Either reduce the memory usage on the machine or increase the amount of physical memory on the machine. Also, increase the space on the swap device.
See Also
See the malloc function.
For UNIX systems, see the malloc(3) manual page.
For Microsoft Windows NT systems, see the Microsoft Visual C++ online help.
1638
ERROR: Memory allocation failure
Description
An attempt to allocate memory dynamically from the operating system using malloc failed.
Action
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Either reduce the memory usage on the machine or increase the amount of physical memory on the machine. Also, increase the space on the swap device.
See Also
See the malloc function.
For UNIX systems, see the malloc(3) manual page.
For Microsoft Windows NT systems, see the Microsoft Visual C++ online help.
1639
ERROR: Key is valid, but expired
Description
During initialization of the IIOP Server Listener/Handler, the SSL package detected an expired private key. This occurred while opening a private key.
Action
Contact your certificate authority or BEA Customer Support.
1640
ERROR: Could not generate random bytes, err = val
Description
The IIOP Server Listener/Handler received the error 'val' while attempting to get random data from the SSL random data object.
Action
Contact BEA Customer Support.
1641
ERROR: Invalid arguments, field id val not passed
Description
Invalid arguments were passed to the IIOP Server Listener.
Action
The error indicates an internal problem with the IIOP Server Listener. Contact BEA Customer Support.
1642
ERROR: Invalid connection id val
Description
An invalid connection id was passed to the IIOP Server Listener.
Action
The error indicates an internal problem with the IIOP Server Listener. Contact BEA Customer Support.
1643
ERROR: Cannot advertise val, tperrno = val
Description
The IIOP Server Listener could not advertise the service used for asymmetric outbound IIOP.
Action
The error indicates an internal problem with the IIOP Server Listener. Contact BEA Customer Support.
1644
ERROR: Cannot advertise val, tperrno = val
Description
The IIOP Server Listener could not advertise the service used for asymmetric outbound IIOP.
Action
The error indicates an internal problem with the IIOP Server Listener. Contact BEA Customer Support.
1645
ERROR: Cannot advertise val, tperrno = val
Description
The IIOP Server Listener could not advertise the service used for asymmetric outbound IIOP.
Action
The error indicates an internal problem with the IIOP Server Listener. Contact BEA Customer Support.
1646
ERROR: Cannot unadvertise val, tperrno = val
Description
The IIOP Server Listener could not unadvertise the service used for asymmetric outbound IIOP.
Action
The error indicates an internal problem with the IIOP Server Listener. Contact BEA Customer Support.
1647
ERROR: Cannot unadvertise val, tperrno = val
Description
The IIOP Server Listener could not unadvertise the service used for asymmetric outbound IIOP.
Action
The error indicates an internal problem with the IIOP Server Listener. Contact BEA Customer Support.
1648
ERROR: Cannot unadvertise val, tperrno = val
Description
The IIOP Server Listener could not unadvertise the service used for asymmetric outbound IIOP.
Action
The error indicates an internal problem with the IIOP Server Listener. Contact BEA Customer Support.
1649
ERROR: Error binding outbound connection request, can't create any more handlers
Description
The IIOP Server Listener could not start another IIOP Server Handler to process the outbound request.
Action
Raise the maximum number of IIOP Server Handlers (ISL -M option).
1650
WARN: Failed to allocate a network resource (val)
Description
The IIOP Server Handler or IIOP Server Listener could not allocate a network descriptor for a remote connection.
Action
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Either reduce the memory usage on the machine or increase the amount of physical mem ory on the machine.
1651
WARN: Failed to reestablish network address val
Description
A previously suspended IIOP Server Listener server was administratively unsuspended but could not reestablish its network address.
Action
Failure to reestablish the network address is usually caused either by a failure of the network drivers on the machine to clear the previously held network address or by another process claiming the network address while the listener was suspended. In the former case, the network address eventually is released by the system and the IIOP Server Listener reestablishes its network address through its periodic retry mechanism; therefore, no action is required in this case. In the latter case, local commands (see below) may be used to determine what processes and users are occupying the network address; these processes and users should be asked to relinquish the address.
See Also
The UNIX netstat command, the Microsoft Windows NT NetStatisticsGet command, and the MIB(5) and WS_MIB(5) commands.
For information about the netstat command, see the UNIX manual page.
For information about the NetStatisticsGet command, see Microsoft Visual C++ online help.
For information about the MIB(5) and WS_MIB(5) commands, see the BEA TUXEDO Reference Manual.
1652
INFO: Reestablished network address val
Description
A previously suspended IIOP Server Listener process has been unsuspended and has reestablished its network address.
Action
Informational message, no action required.
See Also
The MIB(5) and WS_MIB(5) commands. For information about these commands, see the BEA TUXEDO Reference Manual.
1653
ERROR: Memory allocation failure
Description
An attempt to allocate memory dynamically from the operating system using malloc failed.
Action
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Either reduce the memory usage on the machine or increase the amount of physical memory on the machine. Also, increase the space on the swap device.
See Also
See the malloc function.
For UNIX systems, see the malloc(3) manual page.
For Microsoft Windows NT systems, see the Microsoft Visual C++ online help.
1654
ERROR: Error switching to the handler's context
Description
The IIOP Server Handler was attempting to switch from a client application context to the IIOP Server Handler context when it experienced an error.
Action
The error indicates an internal problem with the IIOP Server Handler. Contact BEA Customer Support.
1655
ERROR: descriptor allocation error
Description
An attempt to allocate memory dynamically from the operating system using malloc failed.
Action
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Either reduce the memory usage on the machine or increase the amount of physical memory on the machine. Also, increase the space on the swap device.
See Also
See the malloc function.
For UNIX systems, see the malloc(3) manual page.
For Microsoft Windows NT systems, see the Microsoft Visual C++ online help.
1656
ERROR: descriptor allocation error
Description
An attempt to allocate memory dynamically from the operating system using malloc failed.
Action
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Either reduce the memory usage on the machine or increase the amount of physical memory on the machine. Also, increase the space on the swap device.
See Also
See the malloc function.
For UNIX systems, see the malloc(3) manual page.
For Microsoft Windows NT systems, see the Microsoft Visual C++ online help.
1657
WARN: Received a non-GIOP message
Description
The IIOP Server Listener/Handler received a non-GIOP message. This can occur when a client application other than an WLE remote client application attempts to connect to the IIOP Server Listener/Handler; for example, a JOLT client application, an ATMI client application, or an http client application. After this message is written to the ULOG, the IIOP Server Listener/Handler closes the connection with the client application.
Action
Make sure that only WLE remote client applications connect to the IIOP Server Listener/Handler.
1658
ERROR: Could not establish listening address on network val
Description
This error occurs if the IIOP Server Listener cannot advertise its listening address on the network.
This error could happen for one of the following reasons:
See Also
See the malloc function.
For UNIX systems, see the malloc(3) manual page.
For Microsoft Windows NT systems, see the Microsoft Visual C++ online help.
1659
ERROR: Handler received unexpected message
Description
The IIOP Server Handler received a message without a client application context (that is, a message intended for the IIOP Server Handler that is not in the correct format). It is not a WLE message.
Action
The message is ignored. Contact BEA Customer Support.
1660
ERROR: Handler received unexpected message
Description
The IIOP Server Handler received a message without a client application context (that is, a message intended for the IIOP Server Handler that is not in the correct format). The message received is not a WLE message.
Action
The message is ignored. Contact BEA Customer Support.
1661
ERROR: Couldn't change to client context val, continuing
Description
The IIOP Server Handler could not switch to the client context.
Action
The error indicates an internal problem with the IIOP Server Handler, however, it was able to continue. Contact BEA Customer Support.
1662
ERROR: Sending of request message to server failed
Description
While a request message was being sent to a remote server application, the operation failed.
Action
Check the ULOG for messages indicating the nature of the failure. This warning may indicate that the remote server application is no longer accessible (that is, either the network or machine has failed). Contact BEA Customer Support.
1663
ERROR: Memory allocation failure
Description
An attempt to allocate memory dynamically from the operating system using malloc failed.
Action
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Either reduce the memory usage on the machine or increase the amount of physical memory on the machine. Also, increase the space on the swap device.
See Also
See the malloc function.
For UNIX systems, see the malloc(3) manual page.
For Microsoft Windows NT systems, see the Microsoft Visual C++ online help.
1665
ERROR: Memory allocation failure
Description
An attempt to allocate memory dynamically from the operating system using malloc failed.
Action
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Either reduce the memory usage on the machine or increase the amount of physical memory on the machine. Also, increase the space on the swap device.
See Also
See the malloc function.
For UNIX systems, see the malloc(3) manual page.
For Microsoft Windows NT systems, see the Microsoft Visual C++ online help.
1666
WARN: setsockopt() for SO_KEEPALIVE failed
Description
The KEEPALIVE handler-side networking option was configured for a IIOP Server Listener/Handler pair, but could not be enabled.
Action
This error is ignored and IIOP Server Handler processing continues normally. However, network errors may not be reported, or may be reported less promptly. Consider enabling the inactive client application timeout (ISL command -T option) to reclaim resources associated with dead network connections.
See Also
The ISL command. For information about the ISL command, see the Administration Guide.
1667
WARN: KEEPALIVE option requested but not available on this platform
Description
The KEEPALIVE handler-side networking option is configured for a IIOP Server Listener/Handler pair, but cannot be enabled because it is not available on this platform.
Action
This error is ignored and IIOP Server Handler processing continues normally. However, network errors may not be reported, or may be reported less promptly. Consider enabling the inactive client application timeout (ISL command -T option) to reclaim resources associated with dead network connections.
See Also
The ISL command. For information about the ISL command, see the Administration Guide.
1668
ERROR: Could not connect to host/port val
Description
The IIOP Server Handler could not connect to the host and port contained within the object reference.
Action
Determine if the remote machine has failed.
1669
ERROR: Hex address type not supported
Description
The -n option of the IIOP Server Listener/Handler used the hexadecimal format and the IIOP Server Listener/Handler expects the network address argument to be of the form //host:port.
Action
Correct the application configuration for the IIOP Server Listener/Handler in the UBBCONFIG file and make sure the network address has the appropriate format.
1670
ERROR: Bad Internet type of listening address provided: val
Description
The address is not a valid Internet address.
Action
Any address that starts with // must be a valid Internet address. The following formats are recognized by the system: //hostname:port_number and //#.#.#.#:port_number. Other formats may be recognized. Change address to comply with the known formats. If you believe that your address is in the proper format, contact BEA Customer Support.
1671
ERROR: SSL package is not installed
Description
Applications are trying to use the WLE Security features, but the WLE SSL package is not installed.
Action
Install SSL.
See Also
For information about the WLE Security, see the Using Security in the Developer's Guide Web page or Administration Guide in the online documentation.
1672
ERROR: Memory allocation failure
Description
An attempt to allocate memory dynamically from the operating system using malloc failed.
Action
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Either reduce the memory usage on the machine or increase the amount of physical memory on the machine. Also, increase the space on the swap device.
See Also
See the malloc function.
For UNIX systems, see the malloc(3) manual page.
For Microsoft Windows NT systems, see the Microsoft Visual C++ online help.
1673
INFO: SSL port = val
Description
The IIOP Server Listener/Handler is using port 'val' for this connection.
Action
None
1674
ERROR: Memory allocation failure
Description
An attempt to allocate memory dynamically from the operating system using malloc failed.
Action
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Either reduce the memory usage on the machine or increase the amount of physical memory on the machine. Also, increase the space on the swap device.
See Also
See the malloc function.
For UNIX systems, see the malloc(3) manual page.
For Microsoft Windows NT systems, see the Microsoft Visual C++ online help.
1675
ERROR: Memory allocation failure
Description
An attempt to allocate memory dynamically from the operating system using malloc failed.
Action
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Either reduce the memory usage on the machine or increase the amount of physical memory on the machine. Also, increase the space on the swap device.
See Also
See the malloc function.
For UNIX systems, see the malloc(3) manual page.
For Microsoft Windows NT systems, see the Microsoft Visual C++ online help.
1676
ERROR: Invalid connection id val
Description
An invalid connection id was passed to the IIOP Server Listener.
Action
The error indicates an internal problem with the IIOP Server Listener. Contact BEA Customer Support.
1677
ERROR: Could not close private key, err = val
Description
The IIOP Server Listener/Handler received the error 'val' while trying to close the private key.
Action
The error indicates an internal problem with the IIOP Server Listener. Contact BEA Customer Support.
1678
ERROR: Memory allocation failure
Description
An attempt to allocate memory dynamically from the operating system using malloc failed.
Action
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Either reduce the memory usage on the machine or increase the amount of physical memory on the machine. Also, increase the space on the swap device.
See Also
See the malloc function.
For UNIX systems, see the malloc(3) manual page.
For Microsoft Windows NT systems, see the Microsoft Visual C++ online help.
1679
ERROR: Could not initialize SSL library, err = val
Description
The IIOP Server Listener/Handler received the error 'val' while trying to initialize the SSL library.
Action
The error indicates an internal problem with the IIOP Server Listener. Contact BEA Customer Support.
1680
ERROR: Could not load SSL library val, err = val
Description
The IIOP Server Listener/Handler received the error 'val' while trying to load the SSL library.
Action
The error indicates an installation problem with the WLE Security package. Contact BEA Customer Support.
1681
ERROR: Could not get SSL library init rtn, err = val
Description
The IIOP Server Listener/Handler received the error 'val' while trying to read the SSL library initialization function from the SSL library.
Action
The error indicates an installation problem with the WLE Security package or an internal problem with the IIOP Server Listener. Contact BEA Customer Support.
1682
ERROR: Could not get server information for ISL, errno = val
Description
The IIOP Server Listener/Handler received the error 'val' while trying to get security-specific information for ISL.
Action
The error indicates an internal problem with the IIOP Server Listener. Contact BEA Customer Support.
1683
ERROR: Mixing -R and -a options is not supported
Description
Both the -R and -a command options were specified. This is not supported.
Action
Correct the command line options.
See Also
The ISL command. For information about the ISL command, see the Administration Guide.
1684
INFO: Only first requesting principal will be used
Description
The security service context in the message contains more than one requesting principal. Only the first principal will be used.
Action
Verify that the version of the client software is correct.
1685
ERROR: Invalid permissions for security service context
Description
The security service context contains invalid permissions.
Action
Verify that the -E option is specified and the specified principal is correct. Verify that the version of the client software is correct.
See Also
The ISL command. For information about the ISL command, see the Administration Guide.
1686
ERROR: Unknown security service context version = val.val2
Description
The security service context version val is not supported.
Action
Verify that the version of the client software is correct.
1687
ERROR: can't self-authenticate to principal 'val', engine error val
Description
The security engine error val occurred when the ISH attempted to self authenticate with principal 'val'.
Action
Verify that the specified principal name is correct.
1688
ERROR: Could not decrypt admin key, errno = val
Description
The password for the SEC_PRINCIPAL_NAME in the tuxconfig file could not be decrypted.
Action
Verify that the tuxconfig file is valid. Recreate the tuxconfig file and try again.
1689
ERROR: Could not init decrypt of admin key, errno = val
Description
The password for the SEC_PRINCIPAL_NAME in the tuxconfig file could not be decrypted.
Action
Verify that the tuxconfig file is valid. Recreate the tuxconfig file and try again.
1690
ERROR: Could not get admin key, errno = val
Description
The password for the SEC_PRINCIPAL_NAME in the tuxconfig file could not be decrypted.
Action
Verify that the tuxconfig file is valid. Recreate the tuxconfig file and try again.
1691
ERROR: Could not get server information for ISL, errno = val
Description
The IIOP Server Listener process encountered an error while trying to obtain server information about itself from shared memory. The numeric value of errno_val is printed as part of the error message; you can convert this value to a symbolic value by examining <atmi.h>.
Action
Examine the user log for a prior message indicating a more exact cause of the error. Contact BEA Technical Support.
1692
ERROR: SEC_PRINCIPAL_NAME for this ISL is empty
Description
The SEC_PRINCIPAL_NAME in the tuxconfig file is empty. A plugin may not be able to authenticate an empty principal name.
Action
Verify that the SEC_PRINCIPAL_NAME should be empty.
1693
ERROR: Authorization plugin error = val
Description
The authorization preop operation failed with the val error from the authorization plugin.
Action
Look in the userlog for additional error messages from the authorization plugin.
1694
ERROR: Audit plugin error = val
Description
The audit preop operation failed with the val error from the audit plugin.
Action
Look in the userlog for additional error messages from the audit plugin.
1695
ERROR: Authorization plugin error = val, val
Description
The authorization postop operation failed with the val error from the authorization plugin.
Action
Look in the userlog for additional error messages from the authorization plugin.
1696
ERROR: Authorization plugin error = val
Description
The authorization postop operation failed with the val error from the authorization plugin.
Action
Look in the userlog for additional error messages from the authorization plugin.
1697
ERROR: Authorization plugin error = val
Description
The authorization postop operation failed with the val error from the authorization plugin.
Action
Look in the userlog for additional error messages from the authorization plugin.
1698
ERROR: Authorization plugin error = val, val
Description
The authorization postop operation failed with the val error from the authorization plugin.
Action
Look in the userlog for additional error messages from the authorization plugin.
1699
ERROR: Authorization plugin error = val
Description
The authorization postop operation failed with the val error from the authorization plugin.
Action
Look in the userlog for additional error messages from the authorization plugin.
发起投票
技术讨论
加好友
发消息
2015-3-19 10:42:58 |
赞(
操作
